Scan the QR code for technical support.

ZK-T30A-1 PCB Film Protective Film

Product Introduction

ZK-T30A-1 film protective film is designed to protect printed circuit boards from scratches and chemical solvents that may occur during use and cleaning. It features a large protective layer that is thin, clear, and allows for strong light transmission. Furthermore, it can be easily applied to various protective film laminating equipment. This product consists of a highly transparent PET film, a strong adhesive layer, and a smooth polyester stretch diaphragm.

Product Specifications

Serial Number	Film thickness	Thickness of adhesive	Adhesion level	characteristic
1	6.0 μm	4 μm	250 gm/li	Glossy finish, can be used for marking, can be covered with tape (for internal/external solder mask).
2	6.0 μm	5 μm	250 gm/li	Glossy finish, suitable for marking, and can be covered with tape (for wiring).
3	6.0 μm	5.2 μm	300 gm/li	Glossy finish, can be used for marking, can be applied with tape, thicker adhesive layer can reduce air bubbles after lamination.

Transportation and storage

Transported as general cargo.

Store at room temperature.

Avoid direct sunlight and high heat.

Warranty period: 12 months.

Use clean trucks for transportation. Each package should not be stacked more than three layers high, and the bottom layer should be secured with a non-slip pallet to prevent squeezing, deformation, or tipping.